$*$ Panasonic EYC150GQKW 18 Volt NiMH Cordless 2 Tool Combo Kit

This is an excellent kit , with an excellent drill and saw. The tools a a bit heavy ,but that's the price for heavy duty equipment. Holds charge well during hard work. Recharging is well under the spec. 1 hour. Love the set and would buy again in a beat. To make it better Amazon had a great price.
(3 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Panasonic EYC150GQKW 18 Volt NiMH Cordless 2 Tool Combo Kit

• High capacity 3.5Ah Ni-MH battery for extended run time
• Keyless blade clamping system for quick blade changes
• New ergonomic balanced tool body for comfort and control
• 65 minute charging system for less down time
• Powerful cutting power at 0-2,700 strokes per minute

#$ Milwaukee 0200 20 7 Amp 3 8 Inch Drill

This is a replacement for my old Milwaukee (15years +) that was stolen. Drill seems to be a liitle bulkier than last one. But Milwaukee quality can't be argued. Very happy with drill - Pricey but it last FOREVER.
(3 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Milwaukee 0200 20 7 Amp 3 8 Inch Drill

• Offers speed and torque for maximum versatility
• Ideal for hole saws, twist bits and light fastening
• Powerful 7 Amp motor with 120 volts; 0- to 1200 RPM variable speed control
• Includes all-metal gear case and diaphragm, and chuck key with holder
• Lifetime limited warranty

$ DEWALT DCD920KX 14.4 Volt 1 2 Inch XRP Drill Driver

This is the most impressive drill/driver I have ever owned. the battery life is excellent and the power is amazing. I have used it to remove lug nuts. Once, I was removing a stuck bold and the drill was so powerful it pulled out of my hands and split my chin open. Once I recovered from the daze of being smacked, I marvled at the torque.
(2 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For DEWALT DCD920KX 14.4 Volt 1 2 Inch XRP Drill Driver

• XRP? extended run-time batteries provide long run-time & battery life
• Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time
• Heavy-duty 1/2" ratcheting chuck helps prevent bits from slipping and falling out
• LED Worklight provides increased visibility in confined spaces
• High power, high efficiency motor delivers 325 unit watts out of max power for superior performance in all drilling and fastening applications

#$ Bosch PS20 2A 12 Volt Max Lithium Ion Pocket Driver with 2 Batteries

I have been using this drill for the last month or so very often for different projects and I am quite happy with it. It is small and powerful. Well balanced. Bits are quick to load. The battery charges fast. I purchased the Titan Quick-Disconnect bits separately so they would fit the drill after reading a review recommending this bit set. The drill bits in this set are bad quality.
(47 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Bosch PS20 2A 12 Volt Max Lithium Ion Pocket Driver with 2 Batteries

• 80 in. - lbs. of Torque — Drives 100 3-inch screws per battery charge
• LED Light — For tight spaces and applications
• Forward/Reverse Button — Equally useful at driving or removing screws
• Variable Speed Trigger — For increased sensitivity and control
• 10+1 Clutch — Enables precision driving and eliminates over torque in soft base materials. Max mode allows pilot and other small bore holes

++ Makita 6935FDWDE 14.4 Volt NiMH Cordless Impact Driver

If they still make this little impact drill and the price is right, buy it. Mine has lasted a long time. The new Li-Ion is better though.
(13 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Makita 6935FDWDE 14.4 Volt NiMH Cordless Impact Driver

• Powerful efficient impacting 103.3 ft./lbs. (1,240 in./lbs..) for industrial applications
• Impact resistant magnesium alloy gear case for increased durability
• True variable speed for smooth increase in speed and complete control to match all applications
• Powerful (2.6Ah) Ni-MH batteries have greater capacity and longer run time than any Ni-Cd battery for finishing extended jobs with less downtime
• Two-piece D-28R motor with dual ball bearings and externally accessible brushes for longer tool life

#@: WEN 5142 14.4 Volt Cordless Drill Driver with 2 Batteries

Hello Visitor we have WEN 5142 14.4 Volt Cordless Drill Driver with 2 Batteries. You can Buy Cheap WEN 5142 14.4 Volt Cordless Drill Driver with 2 Batteries In Stock. Low Prices on WEN 5142 14.4 Volt Cordless Drill Driver with 2 Batteries Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping WEN 5142 14.4 Volt Cordless Drill Driver with 2 Batteries | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For WEN 5142 14.4 Volt Cordless Drill Driver with 2 Batteries

• 21 position clutch coupled with variable speed provides proper torque and speed for any job
• Keyless chuck for easy bit and driver changes
• Electronic brake stops rotation of motor as soon as trigger is released
• Reliable power motor provides years of service
• Includes 2 rechargeable batteries and charger, 13 pc. drill bits/screwdriver bits and custom carrying case that stores everything

$ Milwaukee 2602 22CT M18 18 Volt Cordless 1 2 Inch Hammer Drill Driver Kit

Purchased this drill awhile back due to the fact I needed a compact light drill for working around the house I just recently purchased. I was amazed by the power this thing has on a rechargeble battery.



I drilled through drywall, wood, and even some stone outside in the backyard to mount a few things and it never overheated or failed on me. Performed fantastically.



The most shocking aspect was the fact that it kept its power even until the very end! I was in the midst of drilling into studs to mount my LCD flat panel display and was working fine then suddenly stop! No slowdown, no loss of power gradually.



One con I would say is the time it took to charge the batteries. For a quick charge station and battery I was hoping for something that was shorter than 30 minutes, but it took over an hour to charge my dead battery :(.



All in all great product from Milwaukee, would recommend this if your a home do it yourselfer (can't really say anything if it's intended for commercial use.
(2 customers reviews)
Customers Rating=3.5 / 5.0

More Detail For Milwaukee 2602 22CT M18 18 Volt Cordless 1 2 Inch Hammer Drill Driver Kit

• 1/2" All Metal Singel Sleeve Ratcheting Chuck
• Drill Speed (RPM): 0-450/0-1,700
• Blows per Minute: 0-29,000
• Max Torque: 450 in-lbs peak torque
• Includes: 2602-20 M18 Cordless 1/2¿ Hammer Drill / Driver, (2) Compact LITHIUM-ION Batteries, M18 Charger and Carrying Case

$*$ PowerSmith Maglithion MLDD12K2 12 Volt Lithium Ion Compact Drill Driver Kit with 2 Batteries

The first unit I received had clearly been a return and only had one battery pack, so I returned it.



The next unit Amazon shipped also looked like it had been used/opened, but at least it had two batteries. However, *both* batteries are defective; when plugged into the charger the light just blinks red (so maybe it's the charger; who knows). The batteries have enough charge to spin the drill; I can feel a vibration as it spins, indicating the axis is off-center.



The build-quality and quality control on these items are completely absent. I recommend steering clear of this worthless 'brand' of tools.
(9 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For PowerSmith Maglithion MLDD12K2 12 Volt Lithium Ion Compact Drill Driver Kit with 2 Batteries

• 23 Position Torque/Clutch Settings
• 3/8" (10mm) Keyless Chuck
• Built-in LED Work Light
• Magnesium Gear Housing, 0-550 RPM
• Includes Two 12V Lithium-ion Battery Packs, 1-Hour Diagnostic Quick Charger, Double End Bit and Carrying Case

@# Michigan Industrial Tools MIT Tool 14.4 Volt Cordless Drill Battery

I boght these batteries followed as directed they didn't work. The seller wanted to charge me twice for shipping. As far as I'm concerned Toolusa is a bad company. I will never purchase from them again.
(1 customers reviews)
Customers Rating=1.0 / 5.0

More Detail For Michigan Industrial Tools MIT Tool 14.4 Volt Cordless Drill Battery

• Rechargeable Nickel Cadmium Battery
• Replacement Batteries for Cordless Tools
• Voltage: 14.4
• Ahr: 1.2

#*# Factory Reconditioned Ryobi HP412K 12 Volt Cordless Drill Driver

My old drill/driver batteries died and I found this cheaper than a new battery. This works great and I even like the little magnet bit holder at the bottom of the grip. Only the down side is the rpm seems to be low compared to my old Ryobi and this affects when you drill. Although I was able to build metal stud walls with this. Perfect for light DIY and OK for mid DIY.
(15 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Factory Reconditioned Ryobi HP412K 12 Volt Cordless Drill Driver

• 3/8" Keyless chuck enables quick and easy bit changes
• 24 clutch positions virtually eliminates screw stripping by adjusting for various materials and driving depths
• Variable speed switch: 0 - 550 RPM
• Includes two battery packs, one charger, and carry case

$*$ DEWALT DC750KA Heavy Duty 9.6 Volt 3 8 inch Cordless Drill Driver Kit

A Long lasting, reliable cordless drill. The first two I purchased lasted over 12 years. Perfect for most household tasks.
(30 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For DEWALT DC750KA Heavy Duty 9.6 Volt 3 8 inch Cordless Drill Driver Kit

• Heavy duty 3/8-foot single sleeve ratcheting chuck for tighter bit gripping ability
• Dual speed range (0-to-300 RPM and 0-to-1,100 RPM)
• 15-position adjustable clutch for added control
• Weighs only 3.4 pounds
• Included with this drill/driver: two batteries, charger, bit, and a heavy-duty carrying case

-- Makita 6260DWPE 9.6 Volt 3 8 Inch Cordless Drill Driver Kit

I got this for my new house and all the small projects around moving and such. It is great. It always has the power I need and the charge lasts a long time.
(11 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Makita 6260DWPE 9.6 Volt 3 8 Inch Cordless Drill Driver Kit

• Makita 9.6-volt 3/8-inch cordless drill/driver kit out-performs most 12-volt models
• Delivers 212 in-pounds of pure torque power
• 2-speed gear selection provides both 0-350 RPM and 0-1,200 RPM
• Includes 2 9.6-volt Ni-Cd batteries, universal charger, keyless chuck and case
• 1-year limited warranty

#*# Bosch 34614 14.4 Volt 1 2 Inch Compact Tough Drill Driver

I've had this drill for a year now and it's never failed me during the hundreds of screws that we've put in together. It carries so much torque that it can push four inch starbit screws into pressure treated wood faster, easier and quieter than an 18 volt Makita impact driver.



Rust? Sure, there's a little rust on the tip after a year of outdoor use, but it's never affected my work. I'm not making food with it!



If I had to complain, I might say it's a little heavy, but that's what you would expect from a half inch drill. The 18V Dewalt hammer drill and the corded half inch Miluakee Magnum drill are both almost twice as heavy as this one.



Of all the drills I've used (including a 12V Makita), this is the one I like to use the most because it has so much versatility. If you don't have a drill, this would be the one to get.


(7 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Bosch 34614 14.4 Volt 1 2 Inch Compact Tough Drill Driver

• Improved performance--up to 150 (11-percent) more rpm and 80-inches-per-pound (up to 26-percent) of Torque than current models
• Single Sleeve 1/2-inch chuck for one handed bit changes; increased drill bit capacity for versatile applications
• 20+1 clutch for precise driving applications
• Newly designed handle grip for extended comfort and control
• Variable speed trigger for complete control

!$ Dewalt DWD525K Heavy Duty 1 2 VSR Hammer Drill Kit

Great tool! It's made for hard work so it is large and won't fit in small places -- but that has a control advantage. I will probably add a keyless chuck. Trigger speed control is sensitive but workable. A solid piece of power equipment. A bit heavy, but that is what one would expect from a tool this powerful and heavy duty. It should last as long as I do.
(1 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Dewalt DWD525K Heavy Duty 1 2 VSR Hammer Drill Kit

• If You have the right tools You can complete any job!
• We have 8 warehouses in the U.S. so you will get your order Fast!
• Warehouse Locations:

  Cape Girardeau,MO

  Medina,OH

  Lexington,SC

  Montgomery,NY

  Dixon,IL

  Waco,TS

  Woodburn,OR

  Mesquite,NV.

-- Bare Tool Milwaukee 2601 20 M18 18 Volt Compact Driver Drill Tool Only No Battery

A powerful, lightweight drill and driver. Despite buying and enjoying the use of a Hole Hawg prior to doing timber framing with Timberlok screws, I relied largely on the 2601-20 to complete the project. I work with two 2601s, and recommend the purchase of this 'tool only,' and would not hesitate to buy reconditioned Milwaukee equipment.



Milwaukee has done a superb job of combining power with light weight, compactness, and battery function. I like the belt clip also.



I look forward to the drill that beats this one, but can't imagine it.
(7 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Bare Tool Milwaukee 2601 20 M18 18 Volt Compact Driver Drill Tool Only No Battery

• 1/2 in. Ratcheting Chuck with plastic sleeve
• Heavy-Duty 2-Speed Metal Gear Box: 0-350/0-1,400 rpm
• Compact Length (7-3/4 in.) fits in tight areas
• Compact Motor delivers 400 in.-lbs. of maximum torque
• Built-in LED light illuminates work surfaces. Lightweight 3.1 lbs.

#*# Panasonic EY6409GQKW 12 Volt NiMH 1 2 Inch Cordless Drill Driver Kit

I have this drill for almost 3 years and I do remodeling for living. This is my only cordless gun I have now and it is enough. Battery charging is fast enough and it can hold and or last very very long in compare to any other NiMH drills we used before. Feels pretty good, not heavy and have enough power to drill. My frined got himself the 15.6V version and we both like the 12V better. Same power, last same time but mine is lighter:)
(32 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Panasonic EY6409GQKW 12 Volt NiMH 1 2 Inch Cordless Drill Driver Kit

• Two 3.5 Amp NiMH battery packs for long run time
• Delivers 293 in./lbs. of torque
• 1/2-inch keyless chuck handles larger bits
• 55-minute charge save time
• Compact and lightweight for comfortable all-day use

@# Bare Tool Makita BCL180ZW 18 Volt Compact Lithium Ion Cordless Vacuum Tool Only No Battery

Very good and affordable solution for a reliable tool especially if some has also the others makita equipment and batteries. fast delivery
(13 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Bare Tool Makita BCL180ZW 18 Volt Compact Lithium Ion Cordless Vacuum Tool Only No Battery

• Up to 10 minutes of continuous use from a single fully charged 18V Compact Lithium-Ion battery
• Strong suction power for fast and efficient cleaning
• Compact design at only 18-3/4″ long and weighs only 2.7 lbs for reduced operator fatigue
• Ergonomic soft grip handle provides increased comfort and control
• Accepts 18V LXT Lithium-Ion battery for even longer run time

$*$ Campbell Hausfeld PL154599AV 3 8 inch Reversible Drill

This drill has everything going for it. The fit and finish are excellent. It has very little runout, and Campbell Hausfeld didn't scrimp on the chuck; it's a Jacobs. I love the compact size and contoured grip; this drill feels like an extension of my hand. It's very good for drilling in tight places.

Here's a couple of tips...

Like most air drills, this one doesn't have variable speed, so you need to be ready when you hit the trigger.

For continuous or heavy use, It's a good idea to use an in-line or stationary oiler. And flood the drill with oil before you use it for the first time. I poured a teaspoon into the inlet as Campbell Hausfeld recommends.
(1 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Campbell Hausfeld PL154599AV 3 8 inch Reversible Drill

• Used to drill hone, ream hole saw and wire brush most metal or wood materials
• Durable Jacobs chuck for reliable bit replacement
• Soft Santoprene elastomer grip provides increased comfort during continuous use
• Reversible to assist when binding occurs and for replacing screws

#$ DC940 b Dewalt 12v Bare Tool Drill

I've had a basic DeWalt 12v drill for 10 years, recently the chuck got all janky and the screws around the front of the drill stripped out; in 10 years, I haven't been over kind to the drill. It had been dropped a few times and heavy use. I was thrilled to get as much use as I did out of it. I purchased the DC940 bare drill because I had bought new batteries for my old one just 3 months ago. I hadn't realized it had a 1/2" chuck (nice benefit) and with the metal housing st the front of the drill, I expect to get even more use than my previous one. Also has 3 speeds and a month into using it, it works great. I would recommend ordering this drill to anyone that has a charger and batteries already, great price and the shippers got it to me in the expected time.
(2 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For DC940 b Dewalt 12v Bare Tool Drill

• Dewalt 12v Drill Cordless

!$ Milwaukee 2652 22 18 Volt M18 1 2 Inch Compact Impact Wrench with Detent

This has to be one of the great buys for my tool collection. This impact is so light and compact yet packs a big punch! I'm constantly having to use it to get into small places to remove 1/2" hardware (using a 3/4" socket). This thing shreds through them in no time. Everybody at work has put away their full size cordless impacts to use this. Buy it now you won't be disappointed.
(1 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Milwaukee 2652 22 18 Volt M18 1 2 Inch Compact Impact Wrench with Detent

• Milwaukee Designed Impact Mechanism Provides maximum application speed
• Milwaukee 4-Pole Frameless Motor - for maximum efficiency and run-time
• 1/2-Inch Pin Detent - Provides Positive Bit Retention
• Built-In LED Light - Illuminates work surface
• -

-- Factory Reconditioned Bosch 33614 2G RT 14.4 Volt Brute Tough 1 2 Inch Cordless Drill Driver

Hello Visitor we have Factory Reconditioned Bosch 33614 2G RT 14.4 Volt Brute Tough 1 2 Inch Cordless Drill Driver. You can Buy Cheap Factory Reconditioned Bosch 33614 2G RT 14.4 Volt Brute Tough 1 2 Inch Cordless Drill Driver In Stock. Low Prices on Factory Reconditioned Bosch 33614 2G RT 14.4 Volt Brute Tough 1 2 Inch Cordless Drill Driver Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Factory Reconditioned Bosch 33614 2G RT 14.4 Volt Brute Tough 1 2 Inch Cordless Drill Driver | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Factory Reconditioned Bosch 33614 2G RT 14.4 Volt Brute Tough 1 2 Inch Cordless Drill Driver

• Reconditioned Bosch Power Tools have a One-year warranty through the Bosch factory or an authorized service center
• Steel-reinforced collar Enhances durability and protects tool when dropped on the chuck
• Unibody powertrain Maintains alignment between clutch, gearbox and motor for the most durable drivetrain system on the market
• Externally changeable brushes Can be replaced in as little as 2 minutes
• Ratcheting, single-sleeve 1/2? chuck with carbide teeth

$*$ DEWALT DCD930KX 14.4 Volt 1 2 Inch XRP Hammerdrill Drill Driver

Hello Visitor we have DEWALT DCD930KX 14.4 Volt 1 2 Inch XRP Hammerdrill Drill Driver. You can Buy Cheap DEWALT DCD930KX 14.4 Volt 1 2 Inch XRP Hammerdrill Drill Driver In Stock. Low Prices on DEWALT DCD930KX 14.4 Volt 1 2 Inch XRP Hammerdrill Drill Driver Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping DEWALT DCD930KX 14.4 Volt 1 2 Inch XRP Hammerdrill Drill Driver | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For DEWALT DCD930KX 14.4 Volt 1 2 Inch XRP Hammerdrill Drill Driver

• XRP? extended run-time batteries provide long run-time & battery life
• Patented 3-speed all-metal transmission matches the tool to task for fastest application speed and improved run time
• Heavy-duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gripping strength
• LED worklight provides increased visibility in confined spaces
• High power, high efficiency motor delivers 325 unit watts out of max power for superior performance in all drilling and fastening applications

@# Factory Reconditioned Bosch PS10 2 RT Litheon 10.8 Volt Lithium Ion I Driver Kit

The 1st one I got was the worst looking reconditioned tool I ever saw.

Didn't work properly, but CPO was helpful and paid for the return shipment.

They promptly sent a replacement and I'm very happy with the new one.
(22 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Factory Reconditioned Bosch PS10 2 RT Litheon 10.8 Volt Lithium Ion I Driver Kit

• Handy head length of 3.5-inches
• Includes 5-position head, the first pro tool to articulate to 90 degrees
• Cushion grip handle for increased comfort in the grip zone
• Features the most advanced Litheon 10.8-volt battery which provides more battery charges, longer run time and faster charging
• The 7 driving settings + 1 drill setting electronic clutch enhances precision

#*# Milwaukee 0490 22 4 Volt Lithium Ion Screwdriver Kit

Outstanding screwdriver, only complaint did not come with it's own case and no number one

phillips bits came with it. Use it to take apart small electronics and drill holes in

wood and plastic at my job.
(47 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Milwaukee 0490 22 4 Volt Lithium Ion Screwdriver Kit

• The 21 position clutch has auto-shut off for improved torque control
• Heavy-duty 2 speed gearbox provides 200/600 RPM
• Quick-change chuck for one-handed bit changes
• Number of Batteries: 2 ; 3.0 Ah Lithium-ion battery for superior run-time and long life
• Battery fuel gauge displays remaining run-time

#*# Craftsman C3 19.2 volt DieHard Cordless Drill Driver

Hello Visitor we have Craftsman C3 19.2 volt DieHard Cordless Drill Driver. You can Buy Cheap Craftsman C3 19.2 volt DieHard Cordless Drill Driver In Stock. Low Prices on Craftsman C3 19.2 volt DieHard Cordless Drill Driver Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Craftsman C3 19.2 volt DieHard Cordless Drill Driver | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Craftsman C3 19.2 volt DieHard Cordless Drill Driver

• Adjustable torque clutch 24 position clutch adjusts prevent overdriving screws, locks for drilling
• Reversible - to back out stuck bits, screws
• Electric brake - stops chuck quickly for easy and quick operation
• Variable speed 0-400/0-1400 RPM - lets operator match the speed to material and job application
• 19.2 V DC Motor - provides power for most home drilling needs

-- Bare Tool Milwaukee 0721 20 V28 28 Volt Lithium Ion 1 2 Inch Cordless Right Angle Drill Driver Kit Tool Only No Battery

Hello Visitor we have Bare Tool Milwaukee 0721 20 V28 28 Volt Lithium Ion 1 2 Inch Cordless Right Angle Drill Driver Kit Tool Only No Battery . You can Buy Cheap Bare Tool Milwaukee 0721 20 V28 28 Volt Lithium Ion 1 2 Inch Cordless Right Angle Drill Driver Kit Tool Only No Battery In Stock. Low Prices on Bare Tool Milwaukee 0721 20 V28 28 Volt Lithium Ion 1 2 Inch Cordless Right Angle Drill Driver Kit Tool Only No Battery Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Bare Tool Milwaukee 0721 20 V28 28 Volt Lithium Ion 1 2 Inch Cordless Right Angle Drill Driver Kit Tool Only No Battery | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Bare Tool Milwaukee 0721 20 V28 28 Volt Lithium Ion 1 2 Inch Cordless Right Angle Drill Driver Kit Tool Only No Battery

• Light weight - 28V power with 18V weight
• 2-9/16" Capacity - Drilling 2x material with a selfeed bit
• Heavy Duty Gear Box, 0-400/0-1000 Rpm; 1081 in.-lbs max torque
• Head and handle swivel 360 deg - can be locked tight in any position

!$ Ridgid 18V Cordless 1 2 Compact Lithium Ion Drill With 2 Batteries ZRR86006

The batteries will hold a charge for 1 year, then quickly degrade until they are unusable. The drill is of decent quality, i like the chuck operation. I bought this as a kit from home depot when they were fairly new and sent in my warranty. Within a month the trigger would not function between 'off' and 'high,' so i exchanged it for another of the same. I have had no problems with the drill itself but the battery situation is disappointing and frustrating. Im not likely to buy more ridgid cordless products if they keep making disposable batteries.
(7 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Ridgid 18V Cordless 1 2 Compact Lithium Ion Drill With 2 Batteries ZRR86006

• 1/2" single sleeve locking carbide shuck tightens bits quickly and securely
• Automatic spindle lock allows you to open and close chuck with one hand
• High impact torque adjustment ring with 24-position clutch for durability and lighter weight
• Patented slide in battery pack for easy load-n-lock with one hand
• 2-speed transmission for matching power to the task

#$ Paslode 900078NT Cordless 3 4 to 2 Inch 16 Gauge Medium Crown Siding Stapler

This tool is extremely easy to use, completely portable, and has proven to be very reliable. No air compressor to lug around, no hoses to get in the way. It runs on "YELLOW" gas canisters, the gas being ignited with a rechargeable battery.
(5 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Paslode 900078NT Cordless 3 4 to 2 Inch 16 Gauge Medium Crown Siding Stapler

• Lightweight for reduced operator fatigue and increases productivity
• Cordless for easy portability and convenience with no set-up time
• Quick-Clear feature for easy access to nose
• Drives 3/4- to 2-Inch staples for dual-use versatility
• Floating "Handle-Bar" for siding over Celelotex

#@: Makita DK1024D 18 Volt 1 2 Inch Hammer Driver Drill Blower Kit

Hello Visitor we have Makita DK1024D 18 Volt 1 2 Inch Hammer Driver Drill Blower Kit. You can Buy Cheap Makita DK1024D 18 Volt 1 2 Inch Hammer Driver Drill Blower Kit In Stock. Low Prices on Makita DK1024D 18 Volt 1 2 Inch Hammer Driver Drill Blower Kit Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Makita DK1024D 18 Volt 1 2 Inch Hammer Driver Drill Blower Kit | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Makita DK1024D 18 Volt 1 2 Inch Hammer Driver Drill Blower Kit

• 8443D, 1/2" cordless hammer drill
• UB181 cordless blower
• 2 batteries, charger, and case
• 400 in.lbs
• Blows 180 MPH

#*# Makita LXT407 18 Volt LXT Lithium Ion Cordless 4 Piece Combo Kit

Ok, I just purchased Makita LXT407 18-Volt LXT Lithium-Ion Cordless 4-Piece Combo Kit & am going to send in for the bare tool rebate where I'm choosing the circular saw. You Can't go wrong with that at all point blank. I've seen the same kit in home depot for close to $500 after taxes. I've used the flashlight, hammer drill & impact driver but not extensively. I have to say they all perform great. I know carpenters who use these drills on a daily basis & have nothing bad to say about the product & love them. For over 5 years I used 1 of the older models of Makita's cordless drills on a daily basis & that thing rocked, it never let me down. Aside from that I've used their corded tools too be it drills or any type of saw (circular, miter, Jig & reciprocating). I know they make reliable products. What helped me make my final decision was a mixture of the carpenters who use these new LXT Li-Ion drills everyday & my own personal experience. The tools feel great & the drills are light & powerful, especially that mini-me impact driver. As for the reciprocating saw its a cordless, so I don't expect to be doing extra heavy duty stuff with it due to battery life. Except it makes one think from what from what I've researched. I've read on people cutting down tree's with the same model I now own. So I may just be doing heavier work with it than I anticipated. After I have used these tools a lot more than I have, in the next few months I will leave a more in depth review.



I realize this product has been out for a few years now. So I can understand when It was brand new on the market the tools may have had some bugs. As do most products when they are 1st released. Its now 2010, that being said, I've seen some of the same negative reviews I read here on amazon, on other sites. I mean I seen the same exact 1's word for word. All & all the positive reviews outnumber the negative one's & from my own personal experience with Makita products I'm confident with what I have purchased.
(38 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Makita LXT407 18 Volt LXT Lithium Ion Cordless 4 Piece Combo Kit

• 2-speed 1/2-Inch Hammer Driver-Drill (0-400/0-1, 500 RPM) with Makita-built 4-pole motor delivers 450 in.lbs. of Max Torque and weighs only 4.2 lbs
• Variable speed Impact Driver (0-2, 300 RPM) provides 1, 330 in.lbs. of Max Torque in a compact design and weighs only 3.4 lbs
• Reciprocating Saw with Makita-built D35 high torque motor delivers 0-2, 900 strokes per minute and weighs only 7.7 lbs
• 4-Position Flashlight with Xenon bulb runs over 4 hours per charge
• 3-year warranty on tools and 1-year warranty on batteries and charger

$*$ Black Decker CD14SFK 3 8 Inch 14.4 Volt Ni Cad Cordless Drill Driver Kit with Stud Finder

I bought this drill kit on a hardware store special for $50, after my Ryobi 12v Drill died (it's really not up for anything more than casual use). It turned out to be an awesome tool, fairly powerful, brilliantly balanced - and consequently very simple to use. I have even used it on a 2.5 inch hole saw when I was installing new cabinets in my kitchen and cutting holes for the plumbing. Issues I have had with the drill, the battery life under consistent use sucks. Don't hold the trigger in when the drill stalls (yes, you can stall this drill on #12 2.5" screws when mounting shelves), and then turn it like a manual screw drive - I know you are not supposed to do this - but then be honest - you have all done this when the battery is about to die - if you do this you will get smoke coming out the back of the drill - and if you don't let the trigger go you will be buying a new drill. This is not a DeWALT Heavy-Duty Drill/Driver- do don't treat it like one. Issues I have had tho, the charger that comes with the drill is stupid, and wrecks your batteries, it also takes forever to charge the drill. Buy the fast intelligent Black & Decker Battery Charger, it will make your batteries last, and it also charges them in around 90 mins. As it is smart, you can leave the batteries on the charger without destroying their remaining life.



As for the stud finder - it sucks - I think B&D just throw it into this kit as they cannot sell it on its own. If you want a really good, cost effective stud finder - buy Zircon StudSensor i65 Center-Finding Stud Finder and toss the one in this kit in the trash, or sell it on craiglist/ebay.


(24 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Black Decker CD14SFK 3 8 Inch 14.4 Volt Ni Cad Cordless Drill Driver Kit with Stud Finder

• Ideal for jobs around the house
• Variable speed for better control; on-board accessory bit storage
• Included stud finder locates studs through walls with a thickness measuring up to 3/4 inch
• Dimensions: 13.6 x 4.3 x 12.2 inches (WxHxD); weighs 7.6 pounds; 2-year warranty
• Includes one 14.4-volt battery pack, one charger, six one-inch screwdriving bits, one magnetic bit tip holder, kit box, and stud finder

#@: Campbell Hausfeld PL154599AV 3 8 inch Reversible Drill

This drill has everything going for it. The fit and finish are excellent. It has very little runout, and Campbell Hausfeld didn't scrimp on the chuck; it's a Jacobs. I love the compact size and contoured grip; this drill feels like an extension of my hand. It's very good for drilling in tight places.

Here's a couple of tips...

Like most air drills, this one doesn't have variable speed, so you need to be ready when you hit the trigger.

For continuous or heavy use, It's a good idea to use an in-line or stationary oiler. And flood the drill with oil before you use it for the first time. I poured a teaspoon into the inlet as Campbell Hausfeld recommends.
(1 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Campbell Hausfeld PL154599AV 3 8 inch Reversible Drill

• Used to drill hone, ream hole saw and wire brush most metal or wood materials
• Durable Jacobs chuck for reliable bit replacement
• Soft Santoprene elastomer grip provides increased comfort during continuous use
• Reversible to assist when binding occurs and for replacing screws

@# Makita BHR240 18 Volt 7 8 Inch LXT Lithium Ion Cordless SDS Plus Rotary Hammer Kit

The cordless rotary hammer is very powerful and effective. Its great advantage is that it is so light weight. Other cordless hammers are much heavier and do not eat faster into concrete.
(1 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Makita BHR240 18 Volt 7 8 Inch LXT Lithium Ion Cordless SDS Plus Rotary Hammer Kit

• Makita-built variable speed motor delivers 0-1,100 RPM and 0-4,000 BPM for 2X faster drilling; a built-in torque limiter clutch disengages if the bit jams when hitting rebar
• 3 modes of operation with rotation only, hammering with rotation or hammering only; chisel rotates 360-Degree with 40 positions for more efficient drilling
• Compact design at 16-1/8-Inch-Inch long; weighs only 6.6-Pound. for reduced operator fatigue
• Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430-Percent total lifetime work with 2.5X more cycles
• 3-Year warranty on tool; 1-Year warranty on batteries and charger.

$ Factory Reconditioned Bare Tool Milwaukee 2601 80 18 Volt Cordless M18 Lithium Ion 1 2 Inch Driver Drill Tool Only No Battery

Hello Visitor we have Factory Reconditioned Bare Tool Milwaukee 2601 80 18 Volt Cordless M18 Lithium Ion 1 2 Inch Driver Drill Tool Only No Battery . You can Buy Cheap Factory Reconditioned Bare Tool Milwaukee 2601 80 18 Volt Cordless M18 Lithium Ion 1 2 Inch Driver Drill Tool Only No Battery In Stock. Low Prices on Factory Reconditioned Bare Tool Milwaukee 2601 80 18 Volt Cordless M18 Lithium Ion 1 2 Inch Driver Drill Tool Only No Battery Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Factory Reconditioned Bare Tool Milwaukee 2601 80 18 Volt Cordless M18 Lithium Ion 1 2 Inch Driver Drill Tool Only No Battery | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Factory Reconditioned Bare Tool Milwaukee 2601 80 18 Volt Cordless M18 Lithium Ion 1 2 Inch Driver Drill Tool Only No Battery

• Reconditioned Milwaukee Products have a One-year warranty through the Milwaukee factory or an authorized service center
• 1/2-Inch ratcheting chuck with plastic sleeve
• Heavy-duty 2-speed metal gear box provides 0 to 350 and 0 to 1,400 RPM
• Compact length of 7-3/4-inches fits in tight areas
• Built-in LED light illuminates work surfaces

@# Jet JSM 724 1 2 Inch Pneumatic Drill

Hello Visitor we have Jet JSM 724 1 2 Inch Pneumatic Drill. You can Buy Cheap Jet JSM 724 1 2 Inch Pneumatic Drill In Stock. Low Prices on Jet JSM 724 1 2 Inch Pneumatic Drill Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Jet JSM 724 1 2 Inch Pneumatic Drill | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Jet JSM 724 1 2 Inch Pneumatic Drill

• Ball and needle bearing construction for more efficient performance
• Muffled handle exhaust for quiet operation
• Reversing valve and variable speed trigger
• 1/2" chuck

@# Bosch 11536VSR Litheon 36 Volt Lithium Ion 1 Inch SDS Plus Rotary Hammer

This is a great battery, I use it in my ebike. In fact I've got two loaded into the ebike. I can take the charger, which is very light, with me in my backpack and plug in the battery while I sit at the restaurant/bar, Each on recharges in about 15 min. Great product!
(8 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Bosch 11536VSR Litheon 36 Volt Lithium Ion 1 Inch SDS Plus Rotary Hammer

• Powerful 36-Volt cordless rotary hammer with 2 Litheon batteries
• 3-mode selector lets you choose rotation only, rotary hammer and hammer only settings
• Vario-Lock positioning rotates and locks chisel into 36 different positions; integral clutch helps minimize torque reaction
• Includes 360-Degree handle, carrying case, 1-hour charger, depth gauge, 2 Litheon batteries
• 15-Inch long and weighs 9-3/5-Pound; 1-year manufacturer's warranty

@# Panasonic EY7440LN2L 14.4 Volt Lithium Ion Drill Driver Kit With Light

This is the first time that I've used a truly precision drilling instrument, and it is a revelation. The fact that the motor has a braking system is very unusual for someone who has never used a drill of this precise before. I was used to having a motor just slow down and eventually stop. This motor literally stops on a dime. For novice drill users, this is quite an improvement over the usual 9.6 volt (which I'm not sure are even made anymore) minimum torque drills. This is definitely a tool for precision users as well, and if properly cared for (and Panasonic gives great instructions for this) then I fully expect to have this tool for a lifetime. I've never had a piece of equipment that was good enough to care enough about maintaining it and keeping it over long amount of time. I protect this thing like a computer or piece of high tech equipment, and I expect it last and be useful forever. A great selection for any type of user.
(5 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Panasonic EY7440LN2L 14.4 Volt Lithium Ion Drill Driver Kit With Light

• Produces high power performance of 390-inches-per-pound
• Electronic performance monitoring system
• 1/2-inch keyless chuck
• Includes 2 3-Ah li-ion high capacity battery packs, 1 universal charger, and a carrying case
• Lightweight at 3.5-pounds

++ Hitachi DS14DFL 14 2 5 Volt Lithium Ion Drill Kit

I've had two of these drills for about a year or so. Good power, lousy chuck (round bits and drills frequently fall out). Problem is with the battery charger that doesn't charge. Worse is the Customer Service that doesn't respond to my emails (the only route given in "Contact Us"). Is the charger faulty? What might I be doing wrong? Can't tell since I don't hear from them.


(13 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Hitachi DS14DFL 14 2 5 Volt Lithium Ion Drill Kit

• 2- 1-1/2 Amp/Hr. Li-Ion Batteries that are 1/2 the weight of Ni-Cad, 3 times as many charge cycles and 25-Percent more run time per charge
• Hitachi Li-Ion Batteries are compatible with Hitachi Ni-Cad Batteries of same Voltage
• Lightweight and Compact 3-1/2-Pound
• 5 Position Belt Hook with Bit Storage
• 22 Position Slip Clutch

$*$ PowerSmith Maglithion MLRS12C 12 Volt Lithium Ion Compact Hand Saw with 2 Blades

Doesn't come with batteries, charger or cord, you should probably invest in those items first.
(1 customers reviews)
Customers Rating=2.0 / 5.0

More Detail For PowerSmith Maglithion MLRS12C 12 Volt Lithium Ion Compact Hand Saw with 2 Blades

• Quick-Change Blade System
• Variable Speed 0-2100 SPM
• Lock Off Switch Provides Extra Safety and Left or Right Hand Operation
• Accepts Standard T-Shank Jig Saw Blades
• Includes one Metal Cutting Blade and one Wood Cutting Blade

#$ Skil 2887 24 18 Volt 4 Tool Combo Kit

Hello Visitor we have Skil 2887 24 18 Volt 4 Tool Combo Kit. You can Buy Cheap Skil 2887 24 18 Volt 4 Tool Combo Kit In Stock. Low Prices on Skil 2887 24 18 Volt 4 Tool Combo Kit Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Skil 2887 24 18 Volt 4 Tool Combo Kit | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Skil 2887 24 18 Volt 4 Tool Combo Kit

• Two-speed drill/driver with built-in work light
• 5-3/8-inch Skilsaw with carbide blade
• Reciprocating saw with Turbo-Cut
• Two batteries with charge-meter; 1-hour charger; stud finder. Carry bag included
• Stud Finder: Find It, Mark It, Drill It

#$ Panasonic EYC142B 14.4 Volt Li ion Impact Driver Drill Driver Combo Kit with Light

As a finished carpenter and cabinet installer, I use this drill and driver 6 days a week, 8 -10 hours a day. This kit is by far the best I have seen. This is my 3rd Panasonic, and when I saw the impact driver, I had to have it. When I asked the guys at the Tool store, they told me Panasonic makes its own batteries and that's why there the best. The other reviewers are right about the weight and feel and balance....perfect. After 2 solid years of use, I have had no problems at all.
(11 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Panasonic EYC142B 14.4 Volt Li ion Impact Driver Drill Driver Combo Kit with Light

• The new 14.4-volt Li-ion Technology is lighter weight and longer running compared to the industry standard
• It delivers 390-inches-per-pound of power in a lightweight 3.5-pound package
• The electronic performance monitoring system delivers safe li-ion high performance
• Operates at 3 speeds and features a brushless motor for 25-percent longer life
• Provides 18-volt performance in a 14.4-volt package with less weight and size than 12-volts

++ Black Decker AD600 6 Volt Alkaline 1 4 Inch Hex Cordless Drill Driver with Accessory Assortment

I ordered the drill on Feb 13, Feb 17th the money was withdrawn from my account. Three weeks later on the day the company had to deliver the drill, I received an email informing me I was being refunded. No apology or reason. I will never order from this company again.
(15 customers reviews)
Customers Rating=3.5 / 5.0

More Detail For Black Decker AD600 6 Volt Alkaline 1 4 Inch Hex Cordless Drill Driver with Accessory Assortment

• Ideal for small- to medium-duty jobs
• Provides up to 130 RPM and 40-inch-pounds of torque for reliable performance
• Quick Connect bit change system saves time and effort
• Dimensions: 9.2 x 3.5 x 12.0-inches (WxHxD); weighs 1.3-pounds; 2-year warranty
• Includes four AA batteries, 20 anchors and screws, two hex shank screwdriver bits, and two hex shank drill bits

#@: Bare Tool Milwaukee 2601 20 M18 18 Volt Compact Driver Drill Tool Only No Battery

A powerful, lightweight drill and driver. Despite buying and enjoying the use of a Hole Hawg prior to doing timber framing with Timberlok screws, I relied largely on the 2601-20 to complete the project. I work with two 2601s, and recommend the purchase of this 'tool only,' and would not hesitate to buy reconditioned Milwaukee equipment.



Milwaukee has done a superb job of combining power with light weight, compactness, and battery function. I like the belt clip also.



I look forward to the drill that beats this one, but can't imagine it.
(7 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Bare Tool Milwaukee 2601 20 M18 18 Volt Compact Driver Drill Tool Only No Battery

• 1/2 in. Ratcheting Chuck with plastic sleeve
• Heavy-Duty 2-Speed Metal Gear Box: 0-350/0-1,400 rpm
• Compact Length (7-3/4 in.) fits in tight areas
• Compact Motor delivers 400 in.-lbs. of maximum torque
• Built-in LED light illuminates work surfaces. Lightweight 3.1 lbs.

$ Panasonic EY6506NQKW 12 Volt NiMH Cordless Impact Driver

I've used this impact screwdriver for a year and a half daily. So it's tough enough. It drives big screws like butter. Amazing! It drives Phillips as nicely as Robertson without stripping, also amazing. It is very short, so it easily fits between joists. The NiMh batteries are better than NiCd: they carry more power for their weight, are less finicky about charging technique, stay charged longer when unused, and charge rapidly.



cons: Bits always get stuck in the hex chuck, requiring Visegrips to get them out. But I generally use a guide sleeve. Phillips bits sometimes shatter. Robertson bits sometimes jump out of the screwhead since virtually no force is needed to drive the screw. It is single-speed, so you have to be careful as the head sinks into the wood or sheetrock. Also, it's very very loud, requiring hearing protection.



My other impact screwdriver is a Makita. That version has external ports for the motor brushes, and a built-in worklight. But it's hex chuck jams just the same.
(3 customers reviews)
Customers Rating=4.5 / 5.0

More Detail For Panasonic EY6506NQKW 12 Volt NiMH Cordless Impact Driver

• 12-volt cordless impact driver designed for professional applications
• Compact but powerful design; 867 inch/pounds of torque
• Light weight design for easier, safer use
• High-capacity 3.0Ah Ni-MH battery; 45-minute charging system
• 6-1/8 inches long; 3.2 pounds; 1-year warranty

++ Black Decker 9099KC 7.2 Volt Cordless Drill with Keyless Chuck

I definitely like this drill... it gets just about everything done. The most I really ever need it for is drilling a few holes in the wall or in wood or in plastic. For that, it's more than adequate. However, for really heavy duty drilling, you'll need something stronger. It definately does not have the power to drill metal (ex drilling out a stripped screw), or the torque needed to drill a big screw into hardwood. For the general person though, it would work great and fulfill your needs.
(13 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Black Decker 9099KC 7.2 Volt Cordless Drill with Keyless Chuck

• Balanced mid-handle design increases the overall comfort of the drill and the user's control when using the drill
• Fan cooled motor contributes to a longer life of the drill
• Keyless chuck for quick and easy bit changes
• 2 speeds switch with forward/reverse - Low for control when screwdriving; high for drilling
• Includes: 7.2-Volt drill with integral battery and keyless chuck and charger

$ Hitachi DS14DVF3 14.4 volt Ni Cad 3 8 inch Cordless Drill Driver Kit

This was one of my first drills and it works great. I am a hobbyist and this works great. I bought it solely on the reviews, that this is one the best reasonable priced drills with power and so far its true.

I have been buying other Hitachi products because of this drill. Those other products didnt always rate up but this one is still going.

The light is a regular bulb and could use updating to a high power LED but otherwise this is a good buy.
(42 customers reviews)
Customers Rating=4.0 / 5.0

More Detail For Hitachi DS14DVF3 14.4 volt Ni Cad 3 8 inch Cordless Drill Driver Kit

• Compact and lightweight design (4.0-pounds) reduces end user fatigue and fits easily into tight spaces
• Two-piece magnet motor produces 300-inch-pounds of torque to power through the toughest jobs
• 3/8-inch keyless chuck allows for quick and easy bit changes
• Two-speed transmission controlled by a one-touch speed knob, allows a choice between 0-400 and 0-1,200 RPM
• Belt hook with integrated bit holder saves time and adds convenience; 5-year warranty

@# Factory Reconditioned Skil 2567 02 RT 14.4 Volt 3 8 Inch Cordless Drill

Overall, this is a satisfying tool to use for the small jobs and it is a good value. The ergonomics are good: it is well balanced; the grip is comfortable; and the torque, with variable speed settings, is reliable.



The lock release for the battery is not real smooth however; it takes a real squeeze to get it off for a charge. The charge might last 10 minutes of continuous usage; the refresh rate on the charger is around 2 hours.



Still, I am quite satisfied with this tool; it has given me 2 years of reliable service so far and is still stepping up to the plate.



Extracts: A Field Guide for Iconoclasts












(3 customers reviews)
Customers Rating=3.5 / 5.0

More Detail For Factory Reconditioned Skil 2567 02 RT 14.4 Volt 3 8 Inch Cordless Drill

• Factory-reconditioned 3/8-inch 14-volt cordless drill; reversing and electronic brake
• Variable speed (0-700 rpm); removable stud finder for accurate drilling
• Rugged plastic housing
• Includes drill, battery, charger, bit size indicator, case
• 2-year warranty

++ Factory Reconditioned Milwaukee 2420 82 12 Volt Cordless M12 Lithium Ion Hackzall Reciprocating Saw

Hello Visitor we have Factory Reconditioned Milwaukee 2420 82 12 Volt Cordless M12 Lithium Ion Hackzall Reciprocating Saw. You can Buy Cheap Factory Reconditioned Milwaukee 2420 82 12 Volt Cordless M12 Lithium Ion Hackzall Reciprocating Saw In Stock. Low Prices on Factory Reconditioned Milwaukee 2420 82 12 Volt Cordless M12 Lithium Ion Hackzall Reciprocating Saw Shops & Purchase For Best Prices Online - Quick & Easy - Reviews & buy Now Free Shipping Factory Reconditioned Milwaukee 2420 82 12 Volt Cordless M12 Lithium Ion Hackzall Reciprocating Saw | cheap for sale lowest price.Discount review Order today!
Be the first

More Detail For Factory Reconditioned Milwaukee 2420 82 12 Volt Cordless M12 Lithium Ion Hackzall Reciprocating Saw

• Reconditioned Milwaukee products have a one-year warranty through the Milwaukee factory or an authorized service center
• Delivers a 1/2-inch stroke 3,000 times per minute
• 12-volt lithium-ion battery offers longer run-time and fade-free performance
• Keyless Quik-Lok blade clamp allows for quick and easy blade changes
• All-metal gear case for added durability

++ Skil 4680 04 5 Amp Jig Saw Kit with Laser

The other reviewers are definitely not wrong, this is an awful tool, and I base that on 2+ years fighting with this thing.



Pros



- Cost. Although this is textbook case of 'get what you pay for'

- Laser guide

- Scrolling feature

- Selectable dust blower/vacuum port



That's it.



Cons



Flimsy base - Doesn't secure well at all, because the 0,33,45,etc angle detente settings are cheap plastic tab that rests in a metal slot. Even with the locking level down tightly, the base easily wobbles. You can wobble it with just one-finger, so imagine what the force of the cutting plus your weight on the tool will do. Goodbye all hope of straight vertical cuts.



Crappy Balance - The tool's balance combined with the rounded base edges means the base will rock excessively, so you get lots of unintended 'miters'- especially when half the base is off the surface at the beginning or end of a cut.



Play in the scrolling knob - Same as above, even with the blade locked in, it can still easily be wobbled by turning the knob. Unfortunately, the tool is designed so you have to hold onto said knob during use, so unless your hand is a prosthetic with a C-Clamp, the blade's going to wobble. Goodbye all hope of straight horizontal cuts.



Simply put: This tool cannot cut a straight vertical or horizontal line without a jig to totally immobilize the saw base AND scrolling knob from any unwanted movement. Holding the saw against a fence or straightedge isn't going to work with this beast.



Poor blade support - What other reviewers said, plus this poor support combined with the difficulty to control this saw results in frequent blade warping/breakage. Of 16 blades I had when I got this thing, I only have two left that are still straight.



Dust & chip blower dangerous for lefties - This is what I hate the most about this tool. The built in dust blowseverything upwards and to the right of the saw, which for us left-handed users means all the dust and splintery wood flies directly into your face and body (with force!). Open-sided glasses will not protect you from this, you have to use goggles or a full-face shield, and even with them, the ejecta is enough to prevent you from really seeing what you're doing or where you're cutting.



To illustrate, cutting just one 48" line in a sheet of plywood will easily spew enough chips and dust into my face, shirt and hair that at minimum, I need to change shirts, and most, I need a shower. Due to this, I just set the tool to use the vacuum port (I have no vacuum attached), this means I have no chip removal, but at least I don't feel like I'm standing in a sawmill during a tornado.



In short, this saw combines the worst aspects of a jigsaw with none of the usability, safety, quality or performance. I beg you, don't be suckered in by the 'features' and price. Buy something that people actually seem to enjoy using. This piece of junk is a nightmare.
(6 customers reviews)
Customers Rating=2.5 / 5.0

More Detail For Skil 4680 04 5 Amp Jig Saw Kit with Laser

• Built-in laser guide for accurate cutting; built-in worklight to put light where you need it
• 4-position orbital cut control allows wide cut range from smooth to fast
• Precise scrolling action with 360 degree blade rotation for detailed cuts
• Tool-free blade changes; accepts both T and U shank blades
• 2-year warranty

$ Milwaukee 6537 23 Professional Combo Kit 1 2 Magnum Drill and Super Sawzall

- The drill can break your wrist and the sawzall is so unbelievably smooth that you can't believe it is actualy cutting. Lifetime warranty too, I love Milwaukee, and definately not for it's beer.
(2 customers reviews)
Customers Rating=5.0 / 5.0

More Detail For Milwaukee 6537 23 Professional Combo Kit 1 2 Magnum Drill and Super Sawzall

• Super sawzall features a counter balance mechanism
• gear protection system absorbs high impact forces caused by lock ups
• 10 amp Milwaukee built motor delivers 0-3200 spm
• Drill features a 5.5 amp motor with aluminum gear case and diaphragm
• Limited warranty, 30-day no-risk trial